List of Publications

 

 

Prof. Dr. M.. Tufail

1. A. Al-Hamdan, M. Tufail, A. C. Long, C. D. Rudd, “Skin Thickness Variation During Resin Transfer Moulding of Sandwich Structures”, Advanced Composites Letters, Vol.4 No. 5, 1995, pp.157-161.

 

2. A. Al-Hamdan, M Tufail, A. C. Long & C. D. Rudd, “Effects of Process Parameters on Core Movement during Liquid Composite Moulding using Incompressible Cores”, 4th International Conference on Automated Composites, 6-7 September 1995, Nottingham, UK.

 

3. M. Tufail, A. C. Long, C. D. Rudd, “Optimization of Braiding and Consolidation Processes for Commingled Glass / Polypropylene Composites”, 1st International Mechanical Engineering Congress by Institute of Engineers, Pakistan, 26th – 28th May 2001, Karachi.

 

4. M. Tufail, A. C. Long, C. D. Rudd, “Effects of Consolidation Process on Microstructure and Mechanical Properties of Commingled Glass/Polypropylene Composites”, 7th International Symposium on Advanced Materials, Dr A. Q. Khan Research Laboratories Kahuta, 17-21 September 2001, Islamabad.

 

5. M. Tufail, P. R. S. Rashidi, “Rapid Prototype Tooling Using Castable Ceramics”, Mehran University Research Journal of Engineering and Technology, Vol. 20, No 1, January 2001, pp. 51-56.

 

6. M. Tufail, P. R. S. Rashidi, “Consolidation of Commingled Thermoplastic Composite”, Journal of Engineering & Applied Sciences, NWFP University of Engineering & Technology Peshawar, Vol. 20, No. 2 July – Dec 2001, pp. 69-75.5. M. Tufail, P. R. S. Rashidi, “Rapid Prototype Tooling Using Castable Ceramics”, Mehran University Research Journal of Engineering and Technology, Vol. 20, No 1, January 2001, pp. 51-56.

 

7. M. Tufail, A. C. Long, C. D. Rudd, “Mechanical Properties of Braided Commingled Glass/Polypropylene Composites”, 8th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 8-11 September 2003, Islamabad

 

8. M. Tufail, “Consolidation Modeling of Fibre Reinforced Thermoplastic Composite Materials”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.

 

9. M. Tufail, “Consolidation Modeling of Fibre Reinforced Thermoplastic Composite Materials”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.

 

10. M. Tufail, “Fabrication and Mechanical Testing of Fibre Reinforced Thermoplastic Composite Tubes”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.

 

11. M. Tufail, S. H. Lodi, “ISO 9001 Certification for Higher Educational Institutions in Pakistan”, 1st International Conference on Assessing Quality in Higher Education (1st ICAQHE, 2006), 11th -13th December 2006, Lahore.

 

12. M. Tufail, “Processing Investigation and Optimization for Hybrid Thermoplastic Composites”, Journal of University of Science and Technology Beijing April 2007, Volume 14, Issue 2, pp. 185-189

 

13. M. Tufail, “Processing Investigation and Optimization for Hybrid Thermoplastic Composites”, Journal of University of Science and Technology Beijing April 2007, Volume 14, Issue 2, pp. 185-189.

 

14. M. Tufail, S. H. Lodi, “IMPLEMENTATION OF QUALITY STANDARD IN EDUCATIONAL INSTITUTIONS”, International Seminar on Higher Education in the Muslim World: Challenges and Prospects, 24th – 25th March 2008, Kuala Lumpur, Malaysia.

 

Prof. Dr. Syed Amir Iqbal

 

1. S. A. Iqbal, P. T.. Mativenga, M. A. Sheikh, “An evaluation of flow stress material models of AISI1045 for high speed machining”, 331-336, in proc. 4th International Conference on Manufacturing Research 2006, Liverpool, UK.

 

2. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Characterization of the Machining of AISI 1045 steel over a wide range of cutting speeds-Part 1: Investigation of contact phenomena”, 909-916, 221(5), Proceedings of IMechE Part B: Journal of Engineering Manufacture. 2007

 

  3. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Characterization of the Machining of AISI 1045 steel over a wide range of cutting speeds-Part 2: Evaluation of flow stress models and interface friction distribution schemes”, 917-926, 221(5), Proceedings of IMechE Part B: Journal of Engineering Manufacture, 2007

 

4. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Contact length prediction: mathematical models and effect of friction schemes on FEM simulation for conventional to HSM of AISI 1045 steel”, 3(1/2), 18-33, Int. J. Machining and Machinability of Materials, 2008.

 

5. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “A comparative study of tool chip contact length of two engineering alloys for a wide range of cutting speeds”, Intl. J. Advanced Manufacturing Technology, 2008.

6. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “A sensitivity study of the effects of interface heat transfer coefficient on FE modelling of machining process for a wide range of cutting speeds”, 6th International Conference on Manufacturing Research – ICMR-2008, 9-11 September 2008, Brunel University, Middlesex, UK.

 

7. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “An investigative study of interface heat transfer coefficient for the FE modelling of High Speed Machining process”, 1405-1416, 222, Proc. IMechE Part B: Journal of Engineering Manufacture, 2008

 

  8. Salman, S. A. Iqbal, and R. Khalid, “Development of an Aggregate Planning and Scheduling Model for better management of Supply Chain of a Discrete Manufacturing Industry using Linear Programming Techniques”, Paper in-process. (under Independent Study Project (ISP)).

 

9. Khalid, Mumtaz, Zulqarnain and Iqbal, “Quality Cost Procedure: Findings of a Wood Products’ Manufacturer”. Journal of Total Quality Management & Business Excellence, Vol. 28, No. 1, pp 2-20.

 

10. A. Zulqarnain, S. A. Iqbal, and R. Khalid, “Implementing Six Sigma Methodology in a developing country.” International Journal of Process Management and Benchmarking, Vol. 3, No. 3, 2013.

 

11. M. Wasif, S. M. Hasan, S. A. Iqbal, “Determination of Cutter-Head Geometry for the Face-Milling of Hypoid Gears”, submitted in International Journal of Advanced Manufacturing Technology, 14-10-2015.

 

 

12. S. M. Hasan, M. Wasif, S. A. Iqbal, “A Decision Making Collaborative Framework in Extended Supply Chain”, submitted in Journal of Engineering & Applied Sciences (UET Peshawar), 27-07-2014. (This journal is listed in W- category of HEC’s approved journals)

 

 

13. S. M. Hasan, S. Shah, M. Wasif & S. A. Iqbal, “Supply Chain Performance Improvement within Collaborative Product Development Environment”, submitted in International Journal of Supply Chain Management, 31-12-2014.

 

14. M. Wasif, M. Rababah, S. M. Hasan, S. A. Iqbal, “Determination of Accurate Machine-Settings for the Face-Milling of Hypoid Gear”, 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.

 

15. S. M. Hasan, J. Gao, M. Wasif and S. A. Iqbal, “An Integrated Decision Making Framework for Automotive Product Development with the Supply Chain”, 8th International Digital Enterprise Technology (DET) Conference, Stuttgart – Germany, 2014.

 

16. S. M. Hasan, M. Wasif and S.A. Iqbal, "A Collaborative framework for Product Development in Extended Enterprise", International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, Patong Beach, Phuket (Thailand), 2013.

 

17. Aqeel Ahmed, Liming Wang, Syed Amir Iqbal, “An Efficient Method of Collision Detetection For 5-axis CNC Milling”, 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.

 

18. Khalid, Mumtaz, Zulqarnain and Iqbal, “Quality Cost Procedure: Findings of a Wood Products’ Manufacturer”. Journal of Total Quality Management & Business Excellence, Vol. 28, No. 1, pp 2-20, 2015.

 

 Dr. Maqsood Ahmed Khan

 

1. Shaheryar Atta Khan, Muhammad Fahad, M. A. Khan: Green Additive Manufacturing. 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016

 

2. Shaheryar Atta Khan, Bilal Ahmed Siddiqui, Muhammad Fahad, M. A. Khan: Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen. Materials Science Forum 03/2017; 887:128-132., DOI:10.4028/www.scientific.net/MSF.887.128

 

3. M. A. Khan, Z. C. Chen, “Arc-length parameterized NURBS path interpolation for high speed and precision machining”, Proceeding of the 19th International Symposium on Air Breathing Engines, September 13-19, 2009, Montreal, Quebec, Canada.

 

4. M. A. Khan, Z. C. Chen, “An Integrated Approach to Generating Accurate Cutter Location Path with Approximate Arc Length Parameter”, Proceedings of the Canadian Society for Mechanical Engineering Forum 2010, June 10-11, 2010, Victoria, British Columbia, Canada.

 

5. M. A. Khan, Z. C. Chen, “A new Approach to Generating Accurate NURBS Cutter Location paths with Arc Length Parameter”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada.

 

6. M. A. Khan, Z. C. Chen, “An Effective Approach to Approximating 2-D Free-Form Curve Offsets for B-Spline NC Tool Paths with Offset Error Globally Bounded”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada.

 

7. M. A. Khan, Z. C. Chen, “Piecewise NURBS Tool Path with the Arc Length Parameter and their Application on High Feed, Accuracy CNC Milling of 2-D Curved Profiles”, Journal of Manufacturing Science and Engineering, Transactions of ASME, 2010. 6. M. A. Khan, Z. C. Chen, “An Effective Approach to Approximating 2-D Free-Form Curve Offsets for B-Spline NC Tool Paths with Offset Error Globally Bounded”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada.

 

8. M. A. Khan, Z. C. Chen, “Generating Planar Offset Curves with Globally Bounded Offset Error for B-Spline NC Tool Paths”, International Journal of Production Research, 2010.

 

9. M. A. Khan, Z. C. Chen, “A New Approach to Generating Arc Length Parameterized NURBS Tool Paths for Efficient 3-Axis Machining of Smooth, Accurate Sculptured Surfaces”, Submitted to Computer-Aided Design, 2010.

 

10. M. A. Khan, Z. C. Chen, “An Effective Approach to Approximating 2-D Free-Form Curve Offsets for B-Spline NC Tool Paths with Offset Error Globally Bounded”, Proceedings of the Canadian Society for Mechanical Engineering Forum 2010, June 7-9, 2010, Victoria, British Columbia, Canada.

 

11. Z. C. Chen, M. A. Khan, “Piecewise B-Spline Tool Paths With the Arc-Length Parameter and Their Application on High Feed, Accurate CNC Milling of Free-Form Profiles”, Trans. ASME J. Manuf. Sci. Eng.., 2012, Vol. 134 / 031007-13.

 

12. M. A. Khan, Z. C. Chen, “CL-Path in B-Spline Form with Global Error Control for 3-Axis Sculptured Surface Machining”, Proceedings of the 2nd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE'2012), April 28-29, 2012, Singapore.

 

13. S. A. Khan, B. A. Siddiqui, M. Fahad, M. A. Khan, “Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen”, Materials Science Forum,

 

 Dr. Muhammad Fahad

 

1. Shaheryar Atta Khan, Bilal Ahmed Siddiqui, Muhammad Fahad, Maqsood Ahmed Khan: Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen. Materials Science Forum 03/2017; 887:128-132., DOI:10.4028/www.scientific.net/MSF.887.128

 

2. Muhammad Fahad, Marianne Gilbert, Phill Dickens: Microscopy and FTIR investigations of the thermal gelation of methylcellulose in glycols. Polymer Science Series A 01/2017; 59(1):88-97., DOI:10.1134/S0965545X17010047

 

3. Muhammad Fahad: Additive Manufacturing. MATERIALS PROCESSING FOR ENGINEERING MANUFACTURE, Edited by Zainul Huda, 10/2016: chapter 17: pages 357-378; Trans Tech Publications., ISBN: ISBN: 978-3-03835-721-6

 

4. Muhammad Fahad, Zainul Huda: Computer Integrated Manufacturing. MATERIALS PROCESSING FOR ENGINEERING MANUFACTURE, Edited by Zainul Huda, 10/2016: chapter 16: pages 327-353; Trans Tech Publications., ISBN: ISBN: 978-3-03835-721-6

 

5. Syed Asad Ali Naqvi, Muhammad Fahad, Muhammad Atir, Muhammad Zubair, Muhammad MusharafShehzad, Wenjun Xu: Productivity improvement of a manufacturing facility using systematic layout planning. Cogent Engineering 06/2016; 3(1)., DOI:10.1080/23311916.2016.1207296

 

6. Muhammad Fahad, Neil Hopkinson: Evaluation and comparison of geometrical accuracy of parts produced by sintering-based additive manufacturing processes. International Journal of Advanced Manufacturing Technology 06/2016;, DOI:10.1007/s00170-016-9036-z

 

7. Midhat Ali Siddiqui, Sheheryar Mohsin Qureshi, Muhammad Fahad, “Building on Technical Competencies”, International Conference on Applied Mechanics and Industrial Systems, Oman, 2016

 

8. Muhammad Midhat Ali, Muhammad Fahad, Sheheryar Mohsin Qureshi: Technical Competency Framework: Development and Implementation. 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016

 

9. Muhammad Fahad, Syed Tahir Bukhari, JorritLeijting: Assessment and Comparison of Sustainability of Household Products Manufactured in Pakistan using LCA. 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016

 

10. Syed Asad Ali Naqvi, Muhammad Fahad, Muhammad Atir, Muhammad Zubair, Muhammad MusharafShehzad: Design and Evaluation of Layout for an Energy Efficient Faclity. 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016

 

11. Shaheryar Atta Khan, Muhammad Fahad, Maqsood Ahmed Khan: Green Additive Manufacturing. 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016

 

12. Shaheen Perween, Muhammad Fahad, Maqsood Ahmed Khan, “Trends and Future Perspectives in Additive Manufacturing”, Proceedings of First International Conference on Advanced Materials and Process Engineering, Karachi, Pakistan (December 2015)

 

13. Shaheryar Atta Khan, Muhammad Fahad, Maqsood Ahmed Khan, “Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen”, Proceedings of First International Conference on Advanced Materials and Process Engineering, Karachi, Pakistan (December 2015)

 

14. Jasim Arif Ali, Syed Zohaib Ali Naqvi, Rehan Afzal, Tufail Ahmed Memon, Dr. Muhammad Fahad, Dr. Maqssod Ahmed Khan, “Design of a three dimensional printing machine”, First International Symposium on Automotive and Manufacturing Engineering, Islamabad, Pakistan (November 2015)

 

15. Shaheryar A Khan, Bilal A Siddiqui, Muhammad Fahad, “Evaluation of Additive Manufacturing Techniques for Fabrication of Propellers for SUAVs”, Proceedings of Fourth International Conference on Aerospace Science & Engineering, Islamabad, Pakistan (September 2015)

 

16. Javeria Younus, Muhammad Fahad, Maqsood Ahmed Khan, “Evaluation and benchmarking of maintenance organization and planning/scheduling at automotive industries in Pakistan” Procedia CIRP (Accepted for Publication, 2015)

 

17. Javeria Younus, Muhammad Fahad, Maqsood Ahmed Khan, “Evaluation of maintenance management practices in automotive industries of Pakistan”, 5th International Mechanical Engineering Congress, Karachi Pakistan (May 2015)

 

18. Basit Ali, Sarah Jaweed, Muhammad Fahad, “Implementation of Waste Assessment Matrix and Line Balancing For Productivity Improvement in a High Variety/High Volume Manufacturing Plant”, 5th International Mechanical Engineering Congress, Karachi Pakistan (May 2015)

 

19. Muhammad Fahad, Marianne Gilbert, Phill Dickens, “Thermal Gelation of Pluronic F-127 in Ethylene Glycol as a non-aqueous solvent” Plastics, Rubber and Composites: Macromolecular Engineering, Volume 41, Number 3, April 2012 , pp. 148-156(9).

 

20. Muhammad Fahad, Phill Dickens, Marianne Gilbert, “Novel polymeric support materials for jetting based additive manufacturing processes” Rapid Prototyping Journal, Volume 19, Issue 4, 2013, pp. 230-239.

 

21. Muhammad Fahad, Maqsood Ahmed Khan, Marianne Gilbert, “Evaluation of thermal gelation of F-127 in a non-aqueous solvent and its suitability as a support materials for Additive Manufacturing” 4th International Conference on Key Engineering Materials, 22 – 23 March 2014, Bali (Indonesia).

 

22. Muhammad Fahad, Neil Hopkinson, “Evaluation of parts produced by a novel Additive Manufacturing (AM) process” 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November 2012, Johor (Malaysia).

 

23. Muhammad Fahad, Marianne Gilbert, Phill Dickens, “Gel formation of Methylcellulose in Binary Solvent (water and glycol) and its evaluation as support material for jetting based Additive Manufacturing (AM) processes” International conference on Materials Processing Technologies, 28-29 June 2012, Hawaii (USA).

 

24. Muhammad Fahad, Neil Hopkinson, “A new benchmarking part for evaluating the accuracy and repeatability of Additive Manufacturing (AM) processes” 2nd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE’2012), 28-29 April 2012, Singapore.

 

25. Muhammad Fahad, Marianne Gilbert, Phill Dickens, “Novel jettable polymeric support material composition for additive manufacturing (AM) processes” International Conference on Mechanical, Production and Automobile Engineering (ICMPAE’2012), 07-08 January 2012, Dubai.

 

26. Muhammad Fahad, Marianne Gilbert, Phill Dickens, “Thermally formed gels of methylcellulose and their suitability as support materials for jetting based additive manufacturing processes” 12th Conference on Rapid Design, Prototyping and Manufacturing, 17th June 2011, Lancaster (United Kingdom).

 

27. Muhammad Fahad, Marianne Gilbert, Phill Dickens, “Novel polymeric gels and their use for jetting based additive manufacturing processes” International conference on Materials Processing Technologies, 2-3 June 2011, Phuket (Thailand).

 

28. Muhammad Fahad, Marianne Gilbert, Phill Dickens, “Research into a novel support material for jetting based RM process” 21st Solid Freeform Symposium, 9-11 August 2010, Texas (USA).

 

 Dr. Muhammad Wasif

 

1. M. Wasif, Z. C. Chen, “Determination of Cutter-Head Geometry for the Face-Milling of Hypoid Gears” International Journal of Advanced Manufacturing Technology (IJAMT) vol.86,issue.9, Springers,2016 (3081-3090) , 10.1007/s00170-016-8430-x

 

2. Z.C. Chen, M. Wasif, “A Generic and Theoretical Approach to Programming and Post-Processing for Hypoid Gear Machining on Multi-Axis CNC Face-Milling Machines”, International Journal of Advanced Manufacturing Technology, Vol. 81, Issue 1, page 135-148, Springer, 2015. (DOI 10.1007/s00170-015-7171-6).

 

3. M. Wasif, Z. C. Chen, “An accurate approach to determine the cutting system for the face milling of hypoid gears”, International Journal of Advanced Manufacturing Technology, online, Springer, 2015. (DOI 10.1007/s00170-015-7823-6).

 

4. M. Wasif, S. M. Hasan, S. A. Iqbal, “Determination of Cutter-Head Geometry for the Face-Milling of Hypoid Gears”, submitted in International Journal of Advanced Manufacturing Technology, 14-10-2015.

 

5. A. Mussawwir, S. M. Hasan, M. Wasif, “Labor productivity enhancement through work study technique”, submitted in International Journal of Production Research, 15-10-2015.

 

6. S. M. Hasan, M. Wasif, S. A. Iqbal, “A Decision Making Collaborative Framework in Extended Supply Chain”, submitted in Journal of Engineering & Applied Sciences (UET Peshawar), 27-07-2014. (This journal is listed in W- category of HEC’s approved journals)

 

7. S. M. Hasan, S. Shah, M. Wasif & S. A. Iqbal, “Supply Chain Performance Improvement within Collaborative Product Development Environment”, submitted in International Journal of Supply Chain Management, 31-12-2014.

 

8. M. Wasif, Hassan Karim, “An Analytical and Experiment Study of Spring Back in High Tensile Sheet Metal on Several Parameters”, submitted in International Journal of Materials Processing Technology, 20-05-2015.

 

9. M. Wasif, M. Rababah, S. M. Hasan, S. A. Iqbal, “Determination of Accurate Machine-Settings for the Face-Milling of Hypoid Gear”, 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.

 

10. S. M. Hasan, J. Gao, M. Wasif and S. A. Iqbal, “An Integrated Decision Making Framework for Automotive Product Development with the Supply Chain”, 8th International Digital Enterprise Technology (DET) Conference, Stuttgart – Germany, 2014.

 

11. S. M. Hasan, M. Wasif and S.A. Iqbal, "A Collaborative framework for Product Development in Extended Enterprise", International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, Patong Beach, Phuket (Thailand), 2013.

 

12. M. Wasif, Z. C. Chen, S. M. Hasan, “An Accurate Cutter-head Geometry for the CNC Face-milling of Hypoid Gears”, International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, Patong Beach, Phuket (Thailand), 2013.

 

13. M. Wasif, Z. C. Chen, “Cutter radius and blade angle selection model for the high speed face milling of hypoid gear”, International conference on virtual machining process technology (VMPT 2012), May 28 to June 1, Montreal, 2012.

 

14. M. Wasif, Z. C. Chen, “Mathematical model of the pressure and spiral angles on hypoid gear teeth machined with industrial blade”, International conference on virtual machining process technology (VMPT 2012), May 28 to June 1, Montreal, 2012.

 

  Dr. Syed Mehmood Hasan

 

1. Hasan S. M., Shah S. and Gao J., “A collaboration framework for product development in extended enterprise”, Proceedings of 10th international conference on manufacturing research - Advances in Manufacturing Technology, XXVI, Vol. 2, ISBN 9781905866601, 11-13 September 2012.

 

2. Hasan S M., Owodunni O O. and Gao J., “A framework that integrate information/knowledge flow within product Development activities in the extended enterprise”, 10th School Research Conference – Engineering, University of Greenwich, Medway Campus, Kent – UK.

 

3. Hasan S M., Shah S. and Gao J., “A collaboration framework to support decision making in new product development with the supply chain”, accepted in International Conference on Manufacturing research, 19-20 September 2013, Cranfield University, UK.

 

4. Hasan S M. and Shah S. (2013), “An overview of change management within manufacturing environment”, accepted in International Conference on Manufacturing Science and Technology, 3-4 August 2013, Dubai, U.A.E.

 

5. Hasan S M., Owodunni O O. and Gao J., “A framework that integrate information/knowledge flow within product development activities in the extended enterprise”, 11th School Research Conference – Engineering, University of Greenwich, Medway Campus, Kent – UK.

 

6. Hasan S M. and Shah S. (2013), “Use of process modelling in product development integration within manufacturing environment”, International Conference on Manufacturing Science and Technology, 3-4 August 2013, Dubai, U.A.E.

 

7. Hasan S. M., Shah S. and Gao J., “Performance improvement within collaborative product development environment”, submitted in International Journal of Productivity and Performance Management - Manuscript ID IJPPM-03-2013-0060.

 

8. Hasan S M., Gao J. and Iqbal S A., “A collaborative framework for decision making in automotive product development and supply chain”, 8th International Conference on Digital Enterprise Technology, March 25 – 28, 2014, Stuttgart, Germany.

 

9. Hasan S M., Wasif M. and Iqbal S A., " A collaborative framework for product development in extended enterprise", International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, 2013 Patong Beach, Phuket (Thailand).

 

10. M. Wasif, Z. C. Chen, S. M. Hasan, S. A. Iqbal, “A Generic and Theoretical Approach to CNC Programming and Post-Processing for Multi-Axis Face-Milling of Hypoid Gears”, International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, 2013 Patong Beach, Phuket (Thailand).

 

11. M. Wasif, S. M. Hasan, S. A. Iqbal, “Determination of Cutter-Head Geometry for the Face-Milling of Hypoid Gears”, submitted in International Journal of Advanced Manufacturing Technology, 14-10-2015.

 

12. S. M. Hasan, M. Wasif, S. A. Iqbal, “A Decision Making Collaborative Framework in Extended Supply Chain”, submitted in Journal of Engineering & Applied Sciences (UET Peshawar), 27-07-2014.

 

13. M. Wasif, M. Rababah, S. M. Hasan, S. A. Iqbal, “Determination of accurate machine-settings for the face-milling of hypoid gear”, 5th International Mechanical Engineering Congress, 9th and 10th May, 2015.

 

  Dr. Aqeel Ahmed

 

1. Aqeel Ahmed, Zezhong chevy chen, Liming wang, “Safe and short tool length determination for 5-axis machining of sculptured surfaces”. Ist international conference on virtual machining process technology. CIRP sponsored conference in May, 2012.

 

2. Liming wang, Aqeel Ahmed, Zezhong chevy chen, “A parametric CAD model of end mill based on grinding processes” 1st international conference on virtual machining process technology. CIRP sponsored conference in May, 2012.

 

3. Aqeel Ahmed, Z. C. Chen, “A Precise Approach for the Determination of the Setup Parameters to Utilize Maximum Work Space of 5-Axis Machine Tools”, International Journal of Advanced Manufacturing Technology, online, Springer, 2015. (20-11-2015)

 

4. Aqeel Ahmed, Liming Wang, Syed Amir Iqbal, “An Efficient Method of Collision Detetection For 5-axis CNC Milling”, 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.

 

5. Aqeel Ahmed, Z. C. Chen, “A comprehensive approach to determining minimum cutter lengths for five-axis milling”, International Journal of Advanced Manufacturing Technology, online, Springer, 2016. (15-08-2016)

 

  Dr. Anis Fatima

 

1. Fatima A., Mativenga P. “On the comparative cutting performance of nature inspired structured cutting tool in dry cutting of AISI/SAE 4140.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Submitted 2017

 

2. Fatima A., Mativenga P. “Experimental study on cutting performance comparison of structured cutting tools in machining of AISI/SAE 4140..” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Submitted 2017.

 

3. Fatima A., Vincent A.B., Isuamfon F. E., “Process mechanisms and their relevance for sustainable machining processes” International Mechanical Engineering Congress and Exposition conference. Submitted, 2017.

 

4. Fatima A., Mativenga P. “Performance of flank face structured cutting tools in machining of AISI/SAE 4140 over a range of cutting speeds.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol 230 issue1 Page 3-18, 2016

 

5. Fatima A., Mativenga P. “A comparative study on cutting performance of rake-flank face structured cutting tool in orthogonal cutting of AISI/SAE.” The International Journal of Advanced Manufacturing Technology, Vol-78 Issue-09 P/2097-2106, 2015.

 

6. Fatima A., Mativenga P., Whitehead D. J. “Femtosecond laser surface structuring of carbide tooling for modifying contact phenomena.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol-2208 Issue-11, p/1325-1337, 2014.

 

7. Fatima A., Mativenga P. “Assessment of tool rake surface structure geometry for enhanced contact phenomena.” The International Journal of Advanced Manufacturing Technology, p/1-6, 2013.

 

8. Fatima A., Mativenga P. “A review of tool–chip contact length models in machining and future direction for improvement” Proceedings of the Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol-227, issue-3, p/345-356, 2013.

 

  Dr. Sheheryar Mohsin Qureshi

 

1. Midhat Ali Siddiqui, Qureshi, Sheheryar Mohsin, Muhammad Fahad, “Building on Technical Competencies”, International Conference on Applied Mechanics and Industrial Systems, Oman, 2016

 

2. Muhammad Midhat Ali, Muhammad Fahad, Qureshi, Sheheryar Mohsin: Technical Competency Framework: Development and Implementation. 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016

 

3. Qureshi, Sheheryar Mohsin M. A. Siddiqui, M. B. Ramzan, M. Ullah, M. S.. Memon, M. A. Siddiqui “Assessment of the Extent of Implementation of QMS and COQ Concepts – A Case from a Developing Country”, International Conference on Applied Mechanics and Industrial Systems, Oman 2016

 

4. Z. Huda , Qureshi, Sheheryar Mohsin “Quality Assurance in Manufacturing” Foundations of Materials Science and Engineering Vol. 93, Chapter 19 Trans Tech Publications, Switzerland.2016 ISBN: 978-3-03835-721-6

 

5. Qureshi, Sheheryar Mohsin, and ChangWook Kang. "Analysing the organizational factors of project complexity using structural equation modelling." International Journal of Project Management 33.1 (2015): 165-176.

 

6. Qureshi, Sheheryar Mohsin, Sadia Majeed, and Rameez Khalid. "Where do we stand in cost of quality awareness?-Pakistan's case." International Journal of Quality Engineering and Technology 4.4 (2014): 273- 289.

 

7. Qureshi, Sheheryar Mohsin, and ChangWook Kang. “Project Management: simplifying or exacerbating?" Journal of Society of Korea Industrial and Systems Engineering 37.2 (2014): 9-18.

 

8. Ullah, Misbah, ChangWook Kang, and Sheheryar Mohsin Qureshi. “A Study of Inventory Models for Imperfect Manufacturing Setup Considering Work-in-Process Inventory" Journal of Society of Korea Industrial and Systems Engineering 37.4 (2014): 231-238.

 

9. Qureshi, Sheheryar Mohsin, and ChangWook Kang. “A Conceptual Model for Assessing Complexity in Managing Projects Using Structural Equation Modelling Technique.” Korean Society of Project Management Spring-2013 Conference, Seoul, Korea.

 

10. Qureshi, Sheheryar Mohsin, and ChangWook Kang. “Project Management: simplifying or exacerbating?” Society of Korea Industrial and Systems Engineering Fall-2013 Conference, Seoul, Korea.

 

11. Qureshi, Sheheryar Mohsin, and ChangWook Kang. “Assessment of the Understanding of Quality Management System and Cost of Quality Programme in Pakistani Manufacturing and Service Industry” Society of Korea Industrial and Systems Engineering Fall-2014 Conference, Seoul, Korea.

 

12. Ullah, Misbah, ChangWook Kang, and Sheheryar Mohsin Qureshi. “A Study of Inventory Models for Imperfect Manufacturing Setup Considering Work-in-Process Inventory" Society of Korea Industrial and Systems Engineering Fall-2014 Conference, Seoul, Korea.

 

13. Qureshi, Sheheryar Mohsin, and ChangWook Kang. “Evaluating the Understanding of Quality Management System and Cost of Quality Programme in Pakistani Industry - an Empirical Study.” Korean Society of Quality Management Fall-2014 Conference, Seoul, Korea.

 

  Dr. Asim Zaheer

 

1. A. Zaheer, A. Yoxall, and J. Rowson, Task Assessment Tool for Ease and Risk (TAER): A Self-Assessment Tool Develop to Evaluate the Risk Associated with the Performance of Tasks in Domestic Environment. Design for Health, 2017. 1 (2). (Submitted on 1st june 2017)

 

2. A. Zaheer, M. Carre, A. Yoxall, and J. Rowson. Evaluation of adopted postures and the hardest part of the domestic laundry task. in Design4health. 2015. Sheffield, UK: Proceedings of the Third European Conference on Design4Health 2015.

 

3. A. Zaheer, Carre, M., J., Rowson, 2014. Survey Based Study on Domestic Laundry Task. Sheffield: The University of Sheffield.

 

4. A. Zaheer and R. Khalid, “Ergonomics: A workplace realities in Pakistan” International Poster Journal of Science and Technology, Vol. 2, Issue 1, April 2012, pp. 1-11. Published by Biosmass Conversion Research Centre, COMSATS Institute of Information Technology, Vehari, Pakistan. ISSN: 2224-5618.

 

5. Perween, S., A. Zaheer, and R. Khalid,. Classification and Balancing of an Automotive Assembly Line, in International Asia Conference on Industrial Engineering and Management Innovation (IEMI2012) Proceedings 2012: Changsha, China.

 

  Mr. Ali Zulqarnain

 

1. Khalid, Mumtaz, Zulqarnain and Iqbal, “Quality Cost Procedure: Findings of a Wood Products’ Manufacturer”. Journal of Total Quality Management & Business Excellence, Vol. 28, No. 1, pp 2-20, 2015.

 

2. A. Zulqarnain, S. A. Iqbal, and R. Khalid, “Implementing Six Sigma Methodology in a developing country.” International Journal of Process Management and Benchmarking, Vol. 3, No. 3, 2013.

 

3. A. Zulqarnain, R. Khalid, “Gage Repeatability & Reproducibility – An analysis of method and medium for a laboratory”, International Journal of Six Sigma & Competitive Advantage (IJSSCA), accepted 27-11-2014, Inderscience.

 

  Ms. Sadia Majeed

 

1. S. Majeed , Z. Huda, “Economics of Manufacturing” Chapter of Book “ MATERIALS PROCESSING FOR ENGINEERING MANUFACTURE “Chapter 18 Trans Tech Publication 381-406 , 978-3-03835-721-6

 

2. Sheheryar Mohsin Qureshi, Sadia Majeed, & Rameez Khalid, “Where Do We Stand in Cost of Quality Awareness? Pakistan's Case”, International Journal of Quality Engineering and Technology, 4(4), 273-289, 2014.

 

3. Sadia Majeed, Qazi Masood Ahmed, & Muhammad Sabihuddin Butt, “Total Factor Productivity in Pakistan revisited: A dual approach of productivity measurement”, Journal of Social Sciences & Interdisciplinary Research, 3(1), 21-36, 2014

 

  Ms. Shaheen Perween

 

1. S. Perween, A. Zaheer, and R. Khalid, “Classification and Balancing of an Automotive Assembly Line.” Paper accepted at the 19th International Conference on Industrial Engineering and Engineering Management IE&EM, October 27-28, 2012, and proceedings will be published in IEEE Xplore.

 

  Ms. Javeria Younus

 

1. J. Younus, M. Fahad, and M. A. Khan, “Evaluation and benchmarking of maintenance organization and planning/scheduling at automotive industries in Pakistan,” presented at the 13th Global Conference on Sustainable Manufacturing, 2015.

 

2. J. Younus, M. Fahad, and M. A. Khan, “Evaluation of maintenance management practices in automotive industries of Pakistan,” presented at the 5th international mechanical engineering congress, 2015..