-
Design of a semi-submersible floating platform
-
Design of a plate frame heat exchanger
-
Design of a cryogenic tank
-
Design a vacuum tower of a petroleum refinery
-
Design and fabricate acoustic canopy of a diesel generator 100
kVA (SEIMENS)
-
Energy efficient A/C system design for a pharmaceuitical
facility
-
Process piping design of a given system according to ASME B 31.3
-
Solar thermal powered Air-conditioner
-
Modeling of a Co-Generation power plant Serving a multi-purpose
building
-
Air conditioning system for an office building with solar energy
based hot water absorption chillers
-
Design and installation of 10 tons per hour reheating furnace
with recuperator (Heat exchange system) for heating of MS
billets,raw material for production of reinforcing bars (Razzaque
steels Pvt. Ltd.)
-
Effluent line re-routing at PRL Korangi (Pakistan Refinery Ltd.)
-
Design and fabrication of a flying boat.
-
Design of an air cooled engine assembly.
-
Design and fabricate prototype of solar refrigerator
-
To design air conditioning system of a given space using i) DX
coil ii) chill water coil
-
Design of cryogenic tank.
-
Design and fabrication of solar geyser system for NED Mosque.
-
Structural and modal analysis of a exhaust system of a car.
-
Design of a De-Dusting System For Steel Plant to Control
Environmental Pollutions
-
To design of a solar air conditioning system for a food
processing hall. (Youngs pvt. Ltd.)
-
Stress and flexibility analysis of a piping network. (VELOSI
ASSET INTEGRITY Ltd.)
-
Design and draw above ground floating roof tank for gasoline
storage in California USA. (Mr. Salman Hussain)
-
Design and fabrication of electric powered vehicle
-
Design wind turbine for power generation
-
Design heating ventilation and air conditioning system.
-
Termo mechanical analysis of stirling engine head and combustion
chamber
-
Reduction of process variation and elimination of wastages from
the manufacturing processes of AIR CON plant through six sigma
methodology
-
Mechanical design of shell and tube HX according to API 660 and
TEMA using compress software
-
Solar thermal energy utilization for a air conditioning and
refrigerator
-
Designing of a centrifugal pump
-
Duct designing for exhaust of paint shop.
-
Energy auding and designing a vessel and condensate pump (NRL)
-
Design and fabrication of indirect steam generation system
-
To increase the storage capacity of a an existing tank and
increase the design life (MTBR) of tanks to 20 years. (PRL)
-
Design and feasibility study of a cost effective central air
conditioning system for the labs of Mechanical Engg. Dept.
-
Design water operated TESLA turbine
-
Design of cooling water system (WAPDA)
-
Design and fabricate of a biomass gasifier (S.K. Rahman & Co.
Pvt. Ltd.)
-
Hydraulic and Surge analysis of pipeline (NRL)
-
Design of a Solar powered air conditioning system
-
Design, selection, sizing cogeneration system at 90MW KESCL
power plant incorporating steam turbine (Orient energy system)
-
To increase the productivity by using statistical techniques.
-
To design airconditioning system for a building using waste heat
recovery (A. Saadat & Co.)
-
To design a cogeneration system for a building
-
Fabrication of humidification-dehumidification equipment for
underground condensation of humid air for subsurface irrigation
-
Design and implementation and improvements in the solar geyser,
installed at staff canteen and staff washrooms.
-
Design of Hybrid Car
-
Design of multi-stage centrifugal pump