Publications


Prof. Dr. Mubashir Ali Siddiqui


JOURNAL PUBLICATIONS

  • Siddiqui, M., Yang, K. (2010), 'Effective Data Analysis Methods for Incomplete Two-Level Factorial Experiments', Int. Journal of Experimental Design and Process Optimisation, Vol. 1, No. 4, pp.348-364.
  • Siddiqui, M., Yang, K. (2010), 'Adaptive Sequential Experimentation Technique for 33 Designs Based on Revised Simplex Search', Int. Journal of Experimental Design and Process Optimisation, Vol. 1, No. 4, pp.296-314.
  • Siddiqui, M., Yang, K. (2010), 'Split Plot Experiments with Time Trends in Easy-to-Change Factors'. Int. Journal of Quality Engineering and Technology, Vol. 1, No. 3, pp 317-338.
  • Siddiqui, M. and Yang, K. (2009), 'Adaptive sequential experimentation based on revised simplex search', Int. Journal of Experimental Design and Process Optimisation, Vol. 1, Nos. 2/3, pp.105-122.

BOOK CONTRIBUTION

  • Design for Six Sigma by Kai Yang & Basim El-Haik, Chapter 12, Fundamentals of Experimental Design, Sec. 12.6 Incomplete Factorial Experiments, McGraw-Hill Companies Inc 2009.


Prof. Dr. Anjum Khalid


JOURNAL PUBLICATIONS

  • A Khalid, M Mahmood, M Asif, T Muneer "Solar Assisted Pre-Cooled Hybrid Desiccant Cooling System" Renewable Energy - Elsevier, 2009

CONFERENCES

  • A Khalid, "Energy Saving Potential of Insulation in Building" 15th HVACR National Conference on Air - Conditioning Systems, Pakistan HVACR Society Lahore Chapter, Lahore, Pakistan, March, 2008.
  • A Khalid, M Mahmood, "Reliable Weather Data for Energy Simulation Programs "14th HVACR National Conference on Air-Conditioning Systems. Pakistan HVACR Society Karachi Chapter, Karachi - Pakistan, April 8 to 10, 2007.
  • A Khalid, M Mahmood, M Asif, T Muneer "Solar Assisted Hybird Desiccant Cooling system for the Climate of Pakistan" 3rd International Conference on Solar Radiation and Day Lighting, Indian Institute of Technology, New Delhi, India, February 7 to 9, 2007.
  • M Mahmood, A Khalid, "Energy Conservation Using Desiccant Cooling System" 12th HVACR, National Conference on Air-conditioning Systems, Pakistan HVACR Society, Islamabad - Pakistan, 2005
  • A Khalid "Desalination of Textile Mill Wastewater for Fresh Water and Energy Recovery" Pakistan Desalination Association (PakDA) one day seminar" Karachi 1996.


Prof. Dr. -Ing. Naseemuddin


JOURNAL PUBLICATIONS

  • Naseem Uddin, Sven Olaf Neumann,Bernhard Weigand, Bassam A. Younis, Large- Eddy Simulations and heat-flux modeling in a turbulent impinging jet, Journal of Numerical Heat Transfer-A Part A, 55: 906-930, 2009

CONFERENCES

  • Amir Siddiq, Naseem Uddin, Investigation of the effect of flow on a thin orifice plate by fluid structure interaction (FSI) analysis, 7th International Bhurban Conference on applied sciences & Technology (IBCAST), Islamabad, January 2010
  • Waqas Ahmed, Syed Muzammil. Faizan Bari Khan, Babar Kamal, Naseem Uddin, Hypersonic Flow over Cone and Wedge in Context of hypersonic Vehicle Design, 7th International Bhurban Conference on applied sciences & Technology (IBCAST), Islamabad, January, 2010.
  • Naseem Uddin, S.O. Neumann, B. Weigand, Effect of jet's inlet temperature field excitation on heat transfer by turbulent impinging jet: An investigation based on Large Eddy Simulations, Turbulence Heat & Mass Transfer Conference, Rome, Italy, September 2009.
  • N. Uddin, S. O. Neumann, B. Weigand, Nature of turbulence in Complex separated flows investigated through anisotropy invariant mapping, 6th International Bhurban Conference on applied sciences & Technology (IBCAST), Islamabad, January 2009.
  • Naseem Uddin, Sven Olaf Neumann, Bernhard Weigand, The effect of inlet velocity field excitation of turbulent impinging jet heat transfer, Int. Conf. on Jets, Wakes and separated Flows September 16 -19, 2008, Technical University of Berlin, Berlin, Germany.
  • Naseem Uddin, Sven Olaf Neumann, Bernhard Weigand, Large Eddy Simulation of the heat transfer due to swirling & non-swirling jet impingement, Proceedings of ASME Summer Heat Transfer Conference, HT2008-56422, August 10-14, 2008, Jacksonville, Florida USA.
  • N. Uddin, S. O. Neumann, B. A. Younis, and B. Weigand. Stroemungs- und passive skalarfluss-vorgaenge in komplexen turbulenten prallstroemungen. Number 1029. ProcessNet-Fachausschuss Waerme- und Stoffaebertragung, VDIGVC, 2008.

BOOK

  • Naseem Uddin, Turbulence Modeling of Complex Flows in CFD, Verlag Dr. Hut (Publisher in Germany), 2008. (book ISBN 978-3-89963-792-2)


Prof. Dr. Nasir Uddin Shaikh


JOURNAL PUBLICATIONS

  • Shaikh N. and Siddiqui K., (2011): "Near-surface flow structure over windgenerated water waves, part I: wave-induced flow characteristics", Ocean Dynamics, 61:127-141
  • Shaikh N. and Siddiqui K., (2011): "Near-surface flow structure over windgenerated water waves, part II: characteristics of separated and non-separated lows" Ocean Dynamics, 61:143- 154
  • Shaikh N. and Siddiqui K., (2010): "An experimental investigation of the near surface flow over air- liquid and air-solid interfaces", Physics of Fluids, 22, 025103
  • Gajusingh S. T, Shaikh N. and Siddiqui K, (2010): "Influence of a rectangular baffle on the downstream flow structure", Experimental Thermal and Fluid Science, 34, 590-602
  • Shaikh N. and Siddiqui K., (2008): "Airside velocity measurements over the wind-sheared water surface using Particle Image Velocimetry", Ocean Dynamics, 58, 58-79
  • Nasiruddin and Siddiqui K., (2007): "Heat transfer augmentation in a heat exchanger tube using a baffle", International Journal of Heat and Fluid Flow, 28, 318-328

CONFERENCES

  • Shaikh N. and Siddiqui K., "Influence of airflow separation on the turbulent flow structure over wind-generated water waves", ASME Fluid Engineering Division Summer Meeting, Colorado, August 2-5, 2009
  • Shaikh N. and Siddiqui K., "An experimental Investigation of the airflow structure over solid and wind generated water waves" 22nd Canadian Congress of Applied Mechanics, Halifax, May 31-June 4, 2009
  • Shaikh N. and Siddiqui K., "Wave-induced effect on the airside velocity field above the wind generated water waves", ASME Fluid Engineering Division Summer Conference, Florida, August 10-14, 2008
  • Gajusingh S.T., Shaikh N. and Siddiqui, K., "The impact of the vortex induced by a baffle on the turbulent structure", ASME Fluids Engineering Division Summer Conference, Florida, August 10-14, 2008
  • Shaikh N. and Siddiqui K., "An Experimental Investigation of the Flow Structure over Air- Water and Air-solid Interfaces", Canadian Society for Mechanical Engineering, Ottawa, June 5-8, 2008
  • Shaikh N. and Siddiqui K., "Airside velocity measurement above the wind generated water waves", 5th ASME_JSME Joint Fluids Engineering Conference, San Diego, California, July 30-August 2, 2007.
  • Shaikh N. and Siddiqui K., "Velocity and vorticity distribution within the airside boundary layer over the wind-sheared water surface" 21st Canadian Congress of Applied Mechanics, Toronto, June 3-7, 2007
  • Shaikh N., Gajusingh S.T. and Siddiqui , K. "Flow variations in a channel due to the presence of a baffle", 21st Canadian Congress of applied Mechanics, Toronto, June 3-7, 2007

BOOK

  • Shaikh N. and Siddiqui K., (2010): "Shear flow over smooth and Wavy interfaces" ISBN 978- 3-8383-7675-2, Lambert Academic Publishing


Prof. Dr. Ahmad Hussain


IMFACT FACTOR JOURNALS PUBLICATIONS

  • Ahmad Hussain, Shahid Ali, Iqbal Ahmed, Jolius Gimbun, Muhammad H. Albeirutty and Zulfiqar Ahmad Rehan (2016) Microwave Reinforced Transesterification of Rubber Seed Oil Using Waste Cement Clinker Catalyst, Current Nanoscience Volume 12 (E-pub ahead of print).                                                            Impact Factor = 1.096
  • Zainal Abidin Yusof, Iqbal Ahmed, Ahmad Hussain (2015) Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend, Chemical Engineering Technology 38, No. 12, 2170–2180.                                                                  Impact Factor = 2.44
  • Ahmad Hussain, Fouad Abulaban, Syed Khubaib, Sajjad Mubin  (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR, Iranian Journal of Science and Technology – Transaction of Mechanical Engineering, Vol. 39, No.M1, pp 233-242    Impact Factor = 0.53
  • Abdelkarim M. Hegab, Hani Hussain Sait Ahmad Hussain (2015) Impact of the Surface Morphology on the Combustion of Simulated Solid Rocket Motor, Mathematical Problems in Engineering Hindawi Publishing Corporation, Volume 2015, Article ID 485302, http://dx.doi.org/10.1155/2015/485302           Impact Factor = 1.381
  • Dheya Shujaa Al-Othmany, Ahmad Hussain, Essam Banoqitah (2015 High-Level Radioactive Waste Storage Feasibility for the Kingdom of Saudi Arabia Arabian Journal for Science and Engineering, ISSN 1319-8025      Volume 40 Number 1:195-203, DOI 10.1007/s13369-014-1503-y               Impact Factor = 0.4
  • Syed Waheed ul Hasan, Ahmad Hussain (2014) Date Palm Waste Gasification in Downdraft Gasifier and Simulation using ASPEN HYSYS Energy Conversion & Management 88:693-699                                               Impact Factor = 3.59
  • Mustafa Zaidi, Imran Amin, Ahmad Hussain, Nukman Yusoff (2014) Error assessment of laser cutting predictions by semi-supervised learning, Journal of Central South University  (Springer) 221: 3736−3745 DOI: 10.1007/s11771-014-2357-x         Impact Factor = 0.464
  • Fathi Djouider, Ahmad Hussain (2014) A laboratory study of the oxidation of non toxic Cr(III) to toxic Cr(VI) by OH. free radicals in simulated atmospheric water droplets
  • conditions: Potential environmental impact Journal of Hazardous Materials (Elsevier)  276: 19-25                                                                                                 Impact Factor = 4.14
  • Abdullah Alshehri, Ahmad Hussain, Yousof Almubarak (2014) Energy Conversion Measures in the Industries of Saudi Arabia and Development of Methodology for Certification of Energy Personnel in the Kingdom, Energy Policy (Elsevier) 64: 203-208                                                                                                      Impact Factor = 3.382
  • Abdulkarim Hegab, Hani Hussain Sait, Ahmad Hussain, A.S. Said (2014) Numerical Modeling for the Combustion of Simulated Solid Rocket Motor Propellant, Computers and Fluids (Elsevier) 89: 29-37. Impact Factor = 1.830
  • Siti Nur Sakinah Jamaludin, S. Basri, Ahmad Hussain, Dheya Al-Othmany, F. Mustapha and Dewan Muhammad Nuruzzaman (2014) Three Dimensional Finite Element Modeling of Thermomechanical Problems in Functionally Graded Hydroxyapatite/Titanium Plate, Mathematical Problems in Engineering.              Impact Factor = 1.380
  • Ahmad Hussain, Fouad Abolaban (2014) Nuclear Desalination: A Viable Option for Producing Fresh Water- Feasibility and Techno-Economic Studies, Life Science Journal 11(1): 301-307                                                      Impact Factor = 0.167
  • Muhammad Yusuf, Abdelhamid Saoudi, Nazeeh Alothmany, Dheya Alothmany, Sameer Natto, Nurul Islam Molla, Noor Mail, Abdulraheem Abdulrahman Kinsara, Ahmad Hussain(2014) Characterization of the Optically Stimulated Luminescence nanoDot for CT Dosimetry, Life Science Journal 11.                                    Impact Factor = 0.167
  • Ahmad Hussain, Iqbal Ahmed,Hani Hussain Sait, Mohamed Ismail Basayoni, Hegab, Abdelkarim Morsy Hegab, Syed Waheed, Farid Nasir Ani (2013) An Experimental and Simulation Study of Fluidization Behavior of Palm Biomass in a Circulating Fluidized Bed Riser,  Industrial & Engineering Chemistry Research 52: 17529−17537 DOI10.1021/ie401856b              Impact Factor = 2.206
  • F. A. Abolaban, M. A. Najem, Ahmad Hussain, Majdi Alnowaimi, David Bradley (2013) Improving MVCBCT image quality using a Cu target with flattening filter-free LINAC, Life Sci J 2013;10(4):1624-1628]. (ISSN:1097-8135).           Impact Factor = 0.167
  • Mustafa Zaidi, Imran Amin, Ahmad Hussain, Nukman Yusoff (2013) Estimation of ANN Modelling of Laser Cutting with Missing Values, La Pensee 75 (10): 159-171.

Impact Factor = 0.06

  • Iqbal Ahmed, Ani Idris, Ahmad Hussain, Zainal A.M. Yusof, Muhammad Saad Khan (2013) Influence of Co-solvent Concentration on the Properties of Dope Solution and Performance
  • of Polyethersulfone Membranes, Chemical Engineering & Technology (Wiley –VCH Verlag GmbH), 36 (10): 1-9                                        Impact Factor = 1.366
  • Skakaib, M., Iqbal, A., Rosli M. Yunus, Ani Idris, Hussain, A. (2013) Influence of Monosodium Glutamate Additive on Morphology and Permeability Characteristics of Polyamide Dialysis Membrane, Journal of Applied Polymer Science, Vol. 128, Issue 5: 3346-3355 DOI: 10.1002/APP.38377   Impact Factor = 1.395
  • Hani H. Sait, Ahmad Hussain, Arshad Adam Salema, Farid Nasir Ani (2012) Pyrolysis and combustion kinetics of date palm biomass using thermogravimetric analysis, Journal of Bioresource Technology (Elsevier), 118: 382-389    Impact Factor = 4.75
  • Abdelkarim Morsy Hegab, Hani HussainSait, Ahmad Hussain, Ashraf Balabel, Mahdi Almutawa, Fathi Djouider. Modeling Of Microscale Solid Rocket Composite Propellant. Life Sci J 2013; 10(4): 523-531]. (ISSN:1097-8135). http://www.lifescienceite.com.

Impact Factor = 0.167

  • Mahdi AlMutawa, Ahmad Hussain, Abdekarim Morsy Hegab, Faheem Hassan Akhtar. Feasibility Studies of Solar Assisted Desalination Technology for the Coastal Areas of Rabigh Using Multi Effect Desalination Method and Its Lab-Scale Demonstration. Life Sci J 2013;10(3):2691-2697]. (ISSN: 1097-8135).http://www.lifesciencesite.com.

                                                                                          Impact Factor = 0.167

  • Dheya O,Ashraf S, Ahmad H. Gamma Rays Transmission Densitometry of Distillation Columns and Development of a Computerized Expert System for Faulty Analysis, Life Sci J 2013;10(2):1613-1618]. (ISSN:1097-8135). http://www.lifesciencesite.com. 228

                                                            Impact Factor = 0.167

  • Iqbal, A., Hussain,A., I, Hasani, S.M.F., Shakaib, M., Yunus, R.M. (2012) Computational

modeling for visualization of flow patterns in a membrane testing device, Journal of Separation and Purification Technology 90: 1-9          Impact Factor = 3.52

  • Yasmin Nergis, Mughal Sharif, Afzal Farooq Choudhry, Ahmed Hussain, Jawad Abdullah Butt (2012) Impact of Industrial and Sewage Effluents on Karachi Coastal Water and Sediment Quality, Middle-East Journal of Scientific Research 11 (10): 1443-1454, ISSN 1990-9233 Indexed in SCOPUS
  • Sait, H., Hussain, A., Selim, A. (2012) Experimental investigation on freezing of water falling film on vertical bank of cold horizontal tubes, Journal of Thermal Science and Engineering Applications – ASME Transaction, Vol. 4: 1-4 (Indexed in SCOPUS) Cited = 1
  • Hussain, A., Ani, F.N. and Darus, A. N. (2008). Gas-solid flow modelling in the riser of a circulating fluidised bed. International Journal of Modelling and Simulation, 28(1), IASTED, Acta Press. Calgary, CANADA Vol.  28 (1): 85- 90 Cited =3 Indexed in SCOPUS       
  • Hussain, A., Ani, F.N., Sulaiman, N., Adnan, M. (2006). Combustion modeling of an industrial municipal waste combustor. International Journal of Environmental Studies, Taylor and Francis, 63(3): 313-329.                   Indexed in Scopus Cited =3
  • Hussain A., Ani, F.N, Darus, A.N., Mokhtar, H., Azam, S. and Mustafa, A. (2006) Thermochemical Behaviour of the Oil Palm Shell Waste in a Circulating Fluidized Bed Combustor (CFBC).Journal of Oil Palm Research., 18(1),:210-218 Imapact Factor =0.237
  • Hussain, A., Ani,  F.N., Darus, A.N., Mustafa A. and Salema AA. (2005) Simulation studies of gas-solid in the riser of a circulating fluidized bed. Proceedings of the 18th International Conference on Fluidised Bed Combustion, 22-25 May, Toronto, Ontario, Canada Indexed in SCOPUS Cited =3
  • Hussain, A., Ani, F.N, Darus, A.N., Mokhtar, H. and Azam, S. (2006) Thermogravimetric and kinetic study on the pyrolytic process of oil palm solid waste. Journal of Industrial Technology., 15 (1): 87-99 . Indexed in SCOPUS

OTHER JOURNAL PUBLICATIONS

  • Soomro, A., Samo, S.R., Hussain, A. (2012) Fluidization in Cold Flow Circulating Fluidized Bed System, Energy, Environment and Sustainable System, SpringerLink, 161-173, DOI:10.1007/978-3-7091-0109-417
  • Hussain, A., Ani, F.N. and Darus, A.N. (2005) Flow modelling to investigate the effect of riser exit geometries on the riser hydrodynamics of a CFB. Journal of Mechanical Engineering. 34: 1-10.
  • Hussain, A., Ani, F.N., Darus, A. N. and Ahmad, Z. (2006). Thermogravimetric and thermochemical studies of Malaysian oil palm shell waste. Jurnal Teknologi A., 45 (A), Universiti Teknologi Malaysia.
  • Hussain, A., Ani, F.N., Darus, A.N., Adnan, M. F. and Mustafa, A. (2006). Hydrodynamic and fluidization behaviour in a circulating fluidized bed. International Journal of Mechanical and Materials Engineering 1(1):18-23.
  • Ahmad Hussain, Dheya AlOthmany ( 2013) Design of Thermal Loop of a Compact Reactor, International Journal of Engineering and Advanced Technology Research Vol. 1, No. 1, pp. 1-10: Published by European Centre for Research Training and Development, UK (www.ea-journals.org)
  • Ahmad Hussain, Dheya Al-Othmany (2013) Assessment of Aging of Zr-2.5Nb Pressure Tubes for Use in Heavy Water Reactor, Journal of Natural Sciences Research, Vol. 3, No. 2: 98-103
  • Ahmad Hussain, Dheya Al-Othmany (2013) Treatment and Conditioning of Spent Ion Exchange Resin from Nuclear Power Plant, Journal of Advances in Physics Theories and Applications, Vol. 15: 79-89
  • Hussain, A. (2012) CFD Modeling of Grate Furnace Designs for Municipal Solid Waste Combustion, Journal of Asian Transaction on Engineering, 2(3):41-50
  • Ahmad Hussain, Hani Hussain Sait (2012) CFD Modeling of the Dry Spent Fuel Storage of a Pressurized Heavy Water Reactor Mathematical Theory and Modeling, Vol.2, No.10: 11-20
  • M. Bassyouni, F. H. Akhtar, Hussain A. and A. Umer (2012) Biodiesel Production and Investigations on the Performance of Diesel Engine Using Jatropha Oil, Journal of Asian Transaction on Engineering, 2(3):77 - 88
  • Hussain, A., Akhtar, N. A (2011) Supervision and Evaluation Of Research Projects Of Graduate Students – Realities And Requirements, Journal of Quality and Technology Management, Vol. VIII, Issue 2: 123-137
  • Hussain, A., Nergis, Y. (2009) Quality Characterization and Magnitude of Pollution Implication in Textile Mills Effluents, Journal of Quality and Technology Management Vol. V(II): 27- 40
  • Sajjad Mubin, Ammad Hassan Khan and Ahmad Hussain (2008) Performance Optimization of Industrial Municipal Solid Waste Combustors – A Need of the Day to Convert Waste to Wealth, Journal of Pakistan Association for the Advancement of Science, 60 (12),1-10.
  • Hussain, A.,Velautham, S. (2008) Quality Assurance Criteria for Managers in Malaysian Energy Sector, Journal of Quality and Technology Management Vol. IV (II) 57-70
  • Hussain, A., Ani, F. N. (2007) Biomass Utilization for Green Environment:    Co-combustion of Diesel Fuel and Producer Gas in Thermal Applications, Pakistan Journal of Scientific and Industrial Research,Vol.  50 (6):370-376 Indexed in SCOPUS
  • Nik, W.S., Hussain, A., Ani, F.N., Darus, F.N., Ali, Noraaini, A. and Eric, T.H.B. (2006) CFD modelling of industrial furnace designs for minimising emissions. Journal of Solid State Science and Technology Letters. 13(2): 204-205.
  • Hussain, A., Ani, F.N., Darus, A.N., Mokhtar, H., Azam, S., Sulaiman, N., Mustafa, A. and Ahmed, J. (2005) Thermogravimetric and Thermochemical studies of oil palm shell waste. Journal of the Pakistan Institute of Chemical Engineers. Vol. XXXIII: 1-7.
  • Hussain, A., Ani, F.N., Darus, A.N., Mokhtar, H., Azam, S., Sarpin, Z. and Ahmed, J. (2005) Combustion studies of Malaysian oil palm shell waste in a circulating fluidised bed combustor - Influence of primary air and CFBC temperature on emissions. Journal of the Pakistan Institute of Chemical Engineers. Vol. XXXIII: 27-39.
  • Hussain, A. and Ani, F.N. (2004) CFD flow modelling of riser exit geometries of  a circulating fluidized bed. Mehran University Journal of Science & Technology. 24(3), pp 181-190.
  • Hussain, A., Ani, F. N., Darus, A.N., Mustafa, A., Akhtar, N.A. and Ahmed, J. (2004) Hydrodynamic Modeling of gas solid flow in the riser of a circulating fluidised bed using CFD. Journal of the Pakistan Institute of Chemical Engineers. Vol. XXXII: 75-82.
  • Hussain, A., and Ani, F.N. (2004). The effect of riser exit geometer on the hydrodynamics of a circulating fluidized bed. Mehran University Journal of Science & Technology. 24(2):141-148.
  • Hussain, A., Ani, F. N., Akhtar, N.A., Darus, A.N., Adnan, M.F., Mustafa, A., and Ahmed, J. (2004) Combustion Modeling of Municipal Waste Combustor in Malaysia. Journal of the Pakistan Institute of Chemical Engineers. Vol. XXXII:     1-11.

CONFERENCES

  • Ahmad Hussain, Majid Almotairi (2012) Effect of changing fuels on the combustion performance of an industrial boiler. Proceedings of the Winter Enrichment Program- Poster Competition, King Abdullah University, Thuwal, KSA, 21-28 January, Saudi Arabia.
  • Hani H. Sait, Ahmad Hussain (2012) Effects of Feeding Tubes Arrangement, Falling Film Behavior and Backsplash on Ice Formation around Horizontal Tubes Bundles, Proceedings of the International Conference on Nuclear & Renewable Energy Resources (NuRER) 2012, 20-23 May, Istanbul, Turkey.
  • Ahmad Hussain, Hani Sait, Afzal Haque, Sadiq Hussain (2012) Combustion Performance of Low Grade Duki Coal from Baluchistan, Proceedings of the UK-Pakistan Coal Conference, University of Leeds, 2-4 July, United Kingdom.
  • Abdullah, A.S., Hussain, A., Hani, H. S. (2012) THE EXISTENCE OF ENERGY MANAGERS IN AN INDUSTRY - A Need of the Time in the Energy Starved Environment- Proceedings  of the HEFAT 2012, 16-18 July, Malta.
  • Sait, H. H, Hussain, A. (2011) Estimation Of Flow Accelerated Corrosion (FAC) in Feeder Pipes Using CFD Software FLUENT and its Low Temperature Experimental Determination, Proceedings of the Universiti Malaysia Terengganu 10th International Annual Symposium (UMTAS 2011), 11-13 July 2011., Malaysia.
  • Hussain, A., Ahmad, S. (2010) CFD Modeling of Dry Spent Fuel Storage of a Pressurized Heavy Water Reactor, Proceedings of the 7th  International Bhurban Conference on Applied Sciences & Technology, Organized by National Centre for Physics, Quaid-e-Azam University and CESAT, Islamabad., 11-14 January
  • Hussain, A. (2010) Next Generations of Nuclear Power Plants – Realities & Requirements, Proceedings of the Institution of Electrical & Electronics Engineers (IEEEP) Symposium, Organized by IEEEP, Karachi Centre,    17-18 March
  • Hussain, A. (2010) Role of Energy Mangers in Our industry and Energy Conservation Studies
    for a Typical Power Plant, Proceedings of the Third National Conference on Energy Resources of
    Pakistan, Organized by Quaid-e-Awam University, Nawabshah, 18-20 March
  • Hussain, A., Nik, W.S., Ani, F.N., Darus, F.N., Ali, Noraaini, A. and Eric, T.H.B. (2006) CFD
    modelling of industrial furnace designs for minimising emissions. Proceedings of the
    International Conference on Solid State Science and Technology (ICSSST), 4-6 September,
    Kuala Terengganu, Malaysia.
  • Hussain, A., Ani, F.N, Darus, A.N., Mokhtar, H., Azam, S., Sulaiman, N. and Mustafa, A.
    (2006). An investigation into the thermochemical behaviour of the Malaysian oil palm shell
    wastes & coal blends and its combustion studies in a circulating fluidized bed. Proceedings of the
    International Conference on Agricultural Wastes, 21-22 March, Faculty of Environment Studies,
    Universiti Putra Malaysia, Serdang, Malaysia.
  • Hussain, A. and Ani, F.N. (2006) Co-Combustion of Diesel Fuel Oil and Producer Gas from
    Biomass Gasification for Thermal Applications. Proceedings of the Pakistan Oil Gas and Energy
    Exhibition 2006 (POGEE 2006), 18-19 May, Karachi, Pakistan.
  • Hussain, A., Ani, F.N. and Darus, A.N. (2006) Pyrolysis Characteristics and Kinetics of Palm
    Shell Waste Mixtures with Mukah Balingian Coal. Proceedings of the International Conference
    on Energy and Environment (ICEE 2006), 28-30 August, Universiti Tenaga Nasional, Kajang,
    Malaysia.
  • Hussain, A., Ani, F.N. and Darus, F.N. (2006) Pyrolysis behaviour and kinetics of palm shell
    waste mixtures with low grade coal and its combustion studies in a circulating fluidised bed.
    Proceedings of the Seminar on Energy from Biomass 2006, Organised by Forest Research
    Institute of Malaysia (FRIM), 25-26 July, Kepong, Kuala Lumpur.
  • Hussain, A., Sani, W.N., Ani, F.N. and Wahid, M.K. (2006) An Investigation into the
    Thermogravimetric Analysis and Kinetic Parameters of the Sarawak Coal and its Blends with Oil
    Palm Shell Waste. Proceeding of the KUSTEM 5th Annual Seminar on Sustainability Science
    and Management, 2-3 May, Kuala Terengganu, Malaysia.
  • Ani, F.N., Hussain, A., Yi, L.X. and Mohamed, A.F. (2006) Combustion of diesel fuel and
    producer gas in thermal applications. Proceedings of the National Conference & Expo 2006 –
    Waste to Wealth, 10-11 July, Kuala Lumpur, Malaysia.
  • Hussain, A., Ani, F.N., Darus, A.N., Puad, M. and Katiravale, S. (2006) Thermogravimetric and
    Kinetic Studies of Sarawak Coals and its Blends with Oil Palm Shell Waste. Proceedings of the
    National Conference & Expo 2006 – Waste to Wealth, 10-11 July, Kuala Lumpur, Malaysia.
  • Hussain, A., Ani, F.N. and Darus, A.N. (2006) Thermal Behaviour of Coal/Biomass Blends
    during Co-Pyrolysis. Proceedings of the 1st Regional Post Graduate Conference on Engineering
    and Science 2006 (RPCES 2006), 26-27 July, Universiti Teknologi Malaysia, Johor Bharu,
    Malaysia.
  • Hussain, A., Ani, F.N. and Darus, A.N. (2006) Investigation on Co-Combustion Characteristics
    of Palm Shell Waste and Coal in Circulating Fluidized Bed Combustor. Proceedings of the 1st
    Regional Post Graduate Conference on Engineering and Science 2006 (RPCES 2006), 26-27
    July, Universiti Teknologi Malaysia, Johor Bharu, Malaysia
  • Hussain, A., Ani, F.N., Mustafa, A., Mamat, Z.A., Zardi, Z. and Aziz, A. (2005) Combustion
    studies of blended fuel oil as an alternative fuel for industrial gas turbines (AFTUR) and
    controlling NOx and soot emissions. Proceedings of the3rd Pakistan‟s Oil, Gas and Energy
    Exhibition (POGEE), 19-20 May, Karachi, Pakistan.
  • Hussain, A., Ani,  F.N., Darus, A.N., Mustafa A. and Salema AA. (2005) Simulation studies of gas-solid in the riser of a circulating fluidized bed. Proceedings of the 18th International Conference on Fluidised Bed Combustion, 22-25 May, Toronto, Ontario, Canada
  • Hussain, A., Ani, F.N. and Darus, A.N. (2005) Fluidization characteristics of a circulating
    fluidized bed. Proceedings of the National Mechanical Engineering Conference (NAME „05),
    18-20 May, University Teknologi Mara, Malaysia, 391-400
  • Hussain, A., Ani, F.N. and Darus, A.N. (2005) Hydrodynamics of a circulating fluidized bed.
    Proceedings of the International conference in recent advances in Mechanical and Materials
    Engineering (ICRAMME 2005), 30-31 May, University of Malaya, Malaysia.
  • Hussain A., Ani, F.N, Darus, A.N., Mokhtar, H., Azam, S., Sarpin, Z. and Mustafa, A. (2005)
    Experimental and numerical studies of fluidization in a circulating fluidized bed. Proceedings of
    the International Energy Conference, 5-7 August, Jakarta, Indonesia.
  • Hussain A., Ani, F.N, Darus, A.N., Mokhtar, H., Azam, S., Sarpin, Z. and Mustafa, A. (2005)
    Combustion studies of the palm shell waste powder in a circulating fluidized bed combustor
    (CFBC) – influence of primary air and CFBC temperature on emissions. Proceedings of the
    International Energy Conference, 5-7 August, Jakarta, Indonesia.
  • Hussain, A., Ani, F.N., Darus, A. N. and Mustafa, A. (2005). Experimental and computational
    studies of the hydrodynamics of the riser of a CFB, Proceedings of the Brunei International
    Conference on Engineering and Technology (BICET 2005), 15-18 August, Brunei Darussalam.
  • Azam, S., Hussain, A., Ani, F.N, Darus, A.N., Mokhtar, H., Sulaiman, N. and Mustafa, A. (2005)
    Utilization of oil palm shell waste in a circulating fluidized bed combustor (CFBC). Proceedings
    of the International Advanced Technology Congress, Universiti Putra Malaysia, 6-8 December,
    Kuala Lumpur, Malaysia
  • Hussain, A., Ani, F.N. and Darus, A.N. (2004) Flow modelling to investigate the effect of riser
    exit geometries on the riser hydrodynamics of a circulating fluidized bed. Proceedings of the
    International Conference on Scientific and Engineering Computation, June 30 – July 02
    Singapore.
  • Hussain, A., Ani, F.N. and Darus, A.N. (2004). Turbulence modelling of a circulating fluidized
    bed. Proceedings of the 17th International symposium on Analytical Science: Trends,
    Challenges and Opportunities, 24-26 August, 2004, Kuantan, Malaysia.
  • Hussain, A., Ani, F.N. and Darus, A.N. (2004) Simulation of Gas-Solid Flow Behaviour in the
    Riser Section of a circulating Fluidized Bed using Computational Fluid Dynamics Software.
    Proceedings of the JGSEE and Kyoto University Conference on Sustainable Energy and
    Environment (SEE), 1-3 December, Thailand.
  • Hussain, A., Ani, F.N. and Darus, A.N. (2004) A computational study of the hydrodynamics of a
    circulating fluidized bed using CFD software FLUENT. Proceedings of the 7th Asia-Pacific
    International Symposium on Combustion and Energy Utilization (7th APISCEU), 15-17
    December, Hong Kong
  • Hussain, A. and Ani, F.N. (2004) A computational study of gas-solid flow in the riser of a
    circulating fluidized bed. Proceedings of the KUSTEM 3rd annual seminar: Role of Environment
    Sciences and Technology in Sustainable Development of Resources, 4-5 May, Terengganu,
    Malaysia.
  • Hussain, A., Ani, F.N., Adnan, M.F., Surjosatyo, A., Mustafa, A. and Nik, W.B. (2004) CFD
    modelling of an industrial municipal solid waste combustor. Proceedings of the Symposium of
    Malaysian Chemical Engineers (SOMChE 2004), December 13-14, Universiti Teknologi
    PETRONAS, Ipoh, Perak, Malaysia.
  • Hussain, A., Ani, F.N., Darus, A N., Mustafa, A. and Nik, W.B. (2004) Numerical study on the
    influence of various physical parameters over the gas solid two phase flow in the 3D riser of a
    circulating fluidized bed. Proceedings of the Symposium of Malaysian Chemical Engineers
    (SOMChE 2004), December 13-14, Universiti Teknologi PETRONAS, Ipoh, Perak, Malaysia
  • Nik, W.B., Ani, F. N., Masjuki, H H., Hussain, A. and Bulat, K. H. (2004) Thermal stability of
    crop oil as energy transport media in hydraulic system. Proceedings of the Symposium of
    Malaysian Chemical Engineers (SOMChE 2004), December 13-14, Universiti Teknologi
    PETRONAS, Ipoh, Perak, Malaysia.

Dr. Muhammad Shakaib


JOURNAL PUBLICATIONS

  • M. Shakaib, S.M.F. Hasani, M. Mahmood, CFD modeling for flow and mass transfer in spacer-obstructed membrane feed channels, Journal of Membrane Science, (accepted, in press)
  • M. Shakaib, S.M.F. Hasani, M. Mahmood, Study on the effects of spacer geometry in membrane feed channels using three-dimensional computational flow modeling, Journal of Membrane Science, 297 (2007) 74-89.

CONFERENCES

  • S.M.F. Hasani, M. Shakaib, M. Mahmood, CFD modeling of unsteady fluid flow and mass transfer in spacer-filled membrane modules, Proceedings of Conference on Membranes in drinking water production, Toulouse, France, Oct 2008.
  • M. Shakaib, S.M.F. Hasani, M. Mahmood, CFD studies for flow and concentration profiles in feed channels of spiral-wound membrane modules, Proceedings of 10th World Filtration Congress, Leipzig, Germany, April 2008.
  • M. Shakaib, S.M.F. Hasani, M. Mahmood, Effect of spacer geometry on mass transfer in membrane modules - computer simulations, Proceedings of IDA World Congress on Desalination and Water Reuse, Gran Canaria, Spain, Oct 2007.
  • M. Shakaib, S.M.F. Hasani, M. Mahmood, Flow instabilities in feed channels of spiral wound membrane modules, Proceedings of NAFEMS World Congress, Vancouver, Canada, May 2007.
  • S.M.F. Hasani, M. Shakaib, M. Mahmood, Fluid flow and mass transfer in membrane feed channels, Proceedings of 5th IBCAST Conference, Islamabad Pakistan, Jan 2007.
  • M. Shakaib, S.M.F. Hasani, M. Mahmood, Three-dimensional numerical modeling of flows in narrow obstructed channels, Proceedings of 3rd BSME ASME Conference on Thermal Engineering, Bangladesh Dec 2006.
  • M. Shakaib, J.A. Khan, Effect of ultrasonic vibrations on fouling of reverse osmosis membranes, Proceedings on 9th Asian Congress on Fluid Mechanics Isfahan, Iran, May 2002.
  • M. Shakaib, Desalination: A solution to water shortage, Proceedings of Seminar on Water Quality Issues, Islamabad, Pakistan, March 2002.