Publications


2015


JOURNAL PUBLICATIONS

  • Mehdi, Syed Murtuza, Hyun Woo Dang, Chang Nam Kang, and Kyung Hyun Choi. "Resistive behaviour of silver nanoparticle films on ultra-low modulus polydimethylsiloxane with trench type roughness." Journal of Physics D: Applied Physics 48, no. 1 (2014): 015303.
  • Mehdi, Syed Murtuza, Jeongdai Jo, Yang Hoi Doh, Hyun Woo Dang, and Kyung Hyun Choi. "Stretchable and flexible resistive behavior of poly (3, 4‐ethylenedioxythiophene): Poly (styrenesulfonate) thin film on ultra‐low modulus polydimethylsiloxane with trench‐type roughness." Journal of Polymer Science Part B: Polymer Physics 53, no. 3 (2015): 226-233.
  • Ali, Kamran, Junaid Ali, Syed Murtuza Mehdi, Kyung-Hyun Choi, and Young Jin An. "Rapid fabrication of Al 2 O 3 encapsulations for organic electronic devices." Applied Surface Science 353 (2015): 1186-1194.
  • Qamar, S. Z., Pervez, T., & Akhtar, M. (2016). Performance evaluation of water-swelling and oil-swelling elastomers. Journal of Elastomers & Plastics, 48(6), 535-545.
  • Mehdi, Syed Murtuza. "Numerical study of stokes flow of a nano fluid inside a micron size nozzle." Quaid e Awam University Research Journal of Engineering, Science and Technology 14, no. 1 (2015): 33-37.
  • Mehdi, Syed Murtuza, and Sin Kim. "Theoretical study of motion of small spherical air bubbles in a uniform shear flow of water." Nuclear Engineering and Technology 47, no. 1 (2015): 126-134.
  • Yusof, Zainal Abidin Mohd, Iqbal Ahmed, Muhammad Saad Khan, S. Altaf Hussain, Ahmad Hussain, Ibrahim bin Abdul Mutalib, Khaled S. Balkhair, and Muhammad H. Albeirutty. "Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend." Chemical Engineering & Technology 38, no. 12 (2015): 2170-2180.
  • Hussain, A., Abolaban, F., Khubaib, S. M., Mubin, S., & Ahmed, I. (2015). Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR. Iranian Journal of Science and Technology Transactions of Mechanical Engineering, 39, 233-242.

Hegab, Abdelkarim M., Hani Hussain Sait, and Ahmad Hussain. "Impact of the surface morphology on the combustion of simulated solid rocket motor." Mathematical Problems in Engineering 2015 (2015).

  • Al-Othmany, Dheya Shujaa, Ahmad Hussain, and Essam Banoqitah. "High-Level Radioactive Waste Storage Feasibility for the Kingdom of Saudi Arabia." Arabian Journal for Science and Engineering 40, no. 1 (2015): 195-203.

Mughal, Umair Najeeb, Taimur Rashid, and Muhammad Virk. "Charge transfer scheme for atmospheric ice sensing." Sensors & Transducers 184, no. 1 (2015): 146.

  • Mehdi, Syed Murtuza, Kyung Ho Cho, Chang Nam Kang, and Kyung Hyun Choi. "Stretchability of silver films on thin acid-etched rough polydimethylsiloxane substrates fabricated by electrospray deposition." Journal of Electronic Materials 44, no. 7 (2015): 2514-2521.
  • Mughal, Umair Najeeb, and Muhammad Shakeel Virk. "Torque and Axial Loading Physics for Measuring Atmospheric Icing Load and Icing Rate." Sensors & Transducers 184, no. 1 (2015): 136.
  • Rehman, Naveed Ur, and Mubashir Ali Siddiqui. "A novel method for determining sky view factor for isotropic diffuse radiations for a collector in obstacles-free or urban sites." Journal of Renewable and Sustainable Energy 7, no. 3 (2015): 033110.

Gozali, Ebrahim, Mahrukh Mahrukh, Sai Gu, and Spyros Kamnis. "Numerical investigation on effects of nanoparticles on liquid feedstock behavior in High Velocity Oxygen Fuel (HVOF) suspension spraying." Surface and Coatings Technology 280 (2015): 370-377.

  • Mahrukh, Mahrukh, Arvind Kumar, Sai Gu, and Spyros Kamnis. "Computational Development of a Novel Aerosol Synthesis Technique for Production of Dense and Nanostructured Zirconia Coating." Industrial & Engineering Chemistry Research 55, no. 28 (2016): 7679-7695.

CONFERENCE PUBLICATIONS

  • Rashid, Taimur, Hassan Abbas Khawaja, Kåre Edvardsen, and Umair Najeeb Mughal. "Infrared thermal signature evaluation of a pure ice block." (2015).
  • M. Klein, U. Allauddin, R. Keppeler, M. Pfitzner, “Towards Uncertainty Quantification and Quality Assessment for Large Eddy Simulation of Turbulent Premixed Combustion”, International workshop on Uncertainty Quantification in Computational Fluid Dynamics, Paris, France, May 18 to 20, 2015.
  • Anjum Khalid, S. Ahmad Raza,  Engr. Islahuddin, Iqbal Ahmed “Off-Grid Electricity Production for Schools with Hybrid System in the Coastal Region of Sindh - Pakistan” in 5th International Mechanical Engineering Congress held on 9th & 10th May, 2015 at The Institution of Engineers Pakistan.
  • Mehdi, Syed Murtuza, Maaz Akhtar, Soo Wan Kim, and Muhammad Muzamil. "NUMERICAL INVESTIGATION OF TENSILE TESTING FOR SKIN LIKE THIN POLYDIMETHYLSILOXANE (PDMS)."
  • Dr. Muhammad Shakaib, Engr. Islauddin, Engr. Iqbal Ahmed “Numerical Investigation of Thermal Performance of Solar Air Heater With Rib-Roughened Channels” in 5th International Mechanical Engineering Congress held on 9th & 10th May, 2015 at The Institution of Engineers Pakistan.
  • Mr. Muhammad Muzamil, Engr. Daniyal Rizwan, Engr. Hassan Mehboob, Engr. Umair Mohiuddin, Engr. Sadiqeen Noor “Horizontal Axis Wind Turbine Blade Manufacturing through VARTM (Vacuum Assisted” Resin Transfer Molding)” in 5th International Mechanical Engineering Congress held on 9th & 10th May, 2015 at The Institution of Engineers Pakistan.
  • M. Shakaib , IslahUddin , Iqbal Ahmed, “Numerical Investigation Of Thermal Performance Of Solar Air Heater With Rib Roughened Channels” in 5th International Mechanical Engineering Congress held on 9th & 10th May, 2015 at The Institution of Engineers Pakistan
  • Muhammad Muzamil , Daniyal Rizwan, Hassan Mehboob, UmairMohiuddin and Sadiqeen Noor, Horizontal Axis Wind Turbine Blade ManufacturingTrough VARTM (Vacuum Assisted Resin Transfer Molding) in 5th International Mechanical Engineering Congress held on 9th & 10th May, 2015 at The Institution of Engineers Pakistan